| Special Linkages for Low Level Installation |
Available for Valve Sizes
25mm
32mm, 40mm
50mm
80mm
100mm
125mm
150mm |
|
|
|
| Stainless Steel Cable |
| Replacement Cable |
| Technical Specification |
Available in lengths:
9mtrs
30mtr
150mtr
300mtr
760 mtrs
|
|
|
|
| Wall Anchors and Pulley's |
Replacement Wall Anchors and Pulley's
|
| Technical Specification |
Available in:
Pulley with wood thread
Pulley with wood thread 1-1/2" Dia. to B.S. Spec
Pulley with 1/4" BSP thread
Pulley with 1/4" BSP thread 1-1/2" Dia. to B.S. Spec
Wall Anchor with wood thread
Wall Anchor with 1/4" BSP thread
|
|
|
|
| Fusible Links |
| Replacement Fusible Links |
| Technical Specification |
Available in:
71c
92c
104c
127c
143c
180c
|
|
|
|
| Fire Valve Parts (Bag contains assorted fittings) |
| Replacement Kit containing our most popular components. |
| Technical Specification |
Small Bag of Fittings for: 15mm to 32mm Valves
Large Bag of Fittings for: 40mm to 80mm Valves
Extra Large Bag of Fittings for: 100mm to 150mm Valves
|
|
.gif) |
|
| Free Fall Fire Valve Lubricating Compound |
| Valve requires lubrication 3 times a year. |
| Technical Specification |
Available in:
No. 44 Oil & Natural Gas
No. 90 Oil & Natural Gas
|
|
 |
|
|
|
|
| Release Mechanisms |
The Severlek emergency button has a variety of uses
where it is required to have a latching push button
switch to sound an alarm or de-activate equipment.
The switch has both a normally open and a normally
closed contact pair which both change state on the
switch being pressed.
|
| Technical Specification |
Enclosure Grey epoxy coated diecast aluminium with red
plastic button.
Dimensions 89 x 71 x 95mm
Fixing centres 74 x 57mm Ø8mm
Protection rating IP65
Switch rating 2KVA AC, 100W DC
Wire size 2x 2.5mm²
Conduit Connection Pg16
Weight 0.4kg
Available Models:
Manual Quick Release Mechanism
Electromek MK11 manual relese with 2X C/0 contacts
Sevelek Emergency Panic Button C/0 contacts
Kingsway Emergency Panic Button
Key Operated isolation Switch |
|
|
|
| Manual Quick Release Mechanisms |
The Manual Quick Release Mechanism is designed
for use with our free-fall fire valves. The steel cable
from the valve is looped around the pulley and is
released if the button is pressed allowing the valve
arm to fall.
|
| Technical Specification |
Material Red painted cast aluminium body, plastic button,
brass pulley.
Dimensions 135 x 76 x 82.5mm
Fixing Centres 60mm PCD, Ø7mm
Force to release 40N approx.
Weight 0.3kg
|
|
|
|
| Electromek MK11 |
The Electromek is a manual quick release mechanism that also contains a pair of change-over contacts that operate either when the button is pushed or when the cable goes slack for any other
reason (such as a thermal link melting). The electrical contacts may be used to sound an alarm, de-activate equipment or send a signal to a fire control panel.
|
| Technical Specification |
Enclosure Diecast Aluminium Alloy
Dimensions 131 x 172 x 102mm overall
Fixing Centres 4 holes, Ø4mm
Protection Rating IP52
Switch Rating 250V AC, 5A
Wire Size 2.5mm² max
Conduit Connection 2x 20mm E.T.
Pressure to release 40N approx.
Min plunger loading 23N minimum
Weight 1.4kg
|
|
|
|
|
.gif)
