| LKGMS Gas Proving System |
The LKGMS controller is a fully automatic pressure proving system that will check out pipework and determine if there is a system leak. Typical installations would be 27mBar and 38mBar systems. The control panel will when turned on, energise the gas supply valve for a short period of time and then perform a series of tests on the pressure in the pipework. From the result of these tests the control panel will declare the pipework leak-tight or not. This is indicated by one of two lights on the control panel. If the pipework is declared leak-tight, then the gas supply valve is energised.
|
| Technical Specification |
- Supply Voltage 230V AC
- Power 30VA + valve
- Enclosure Off-White epoxy powder coated
steel with locking door.
- Protection Rating IP54
- Temperature Range: -10°C to +50°Valve Voltage
- Output As supply voltage
- Valve Current Output 5A max
- Weight 1 Kg (excluding main valve)
- Timer Programmable 7 day
- Valve EN161 Approved gas valve
- Pressure Switch
- Setting Range 2.5 to 50mbar (1 to 20” w.g.)
- Mounting Thread G¼ female on base
- Housing Material Diecast Aluminium with
- Polycarbonate cover
- Electrical Contacts Screw terminals via PG11
- Cable gland
- Protection Rating IP54
- Approvals To EU Gas Appliance Directive
CE-0085 AO 0012
|
|
|
