×
Dry Riser Inlet Cabinet & System Landon Kingsway dry riser inlet cabinet
Make an enquiry Downloads

Enquire about
Dry Riser Inlet Cabinet & System

    Downloads for
    Dry Riser Inlet Cabinet & System


    LK Datasheet_Dry Riser Inlet Cabinet & System   Download

    Dry Riser Inlet Cabinet & System

    The Dry Riser Inlet Cabinet and system is normally a dry unit that is charged by the fire brigade in the event of an emergency. An inlet breeching at ground level provides the connection to the water supply.

    Breeching inlets have either 2 or 4 inlet connections complete with 2.5” male instantaneous inlets to BS336 fitted with non-return valves, 1” drain valve and caps and chains.

    A 100mm (4”) rising main uses a 2-way inlet breeching in a vertical or horizontal position. A 150mm (6”) rising main uses a 4-Way inlet breeching. Inlet Breechings comply with the requirements of BS 5041 Part 3.

    The Breechings are normally housed in inlet cabinets, normally recessed into the external wall of the building in a vertical or horizontal position, 4 -way breechings in a square inlet breeching cabinet, manufactured in accordance with BS 5041 Part 5.

    Cabinets for foam inlets are available on request.

    Recommended mounting 750mm from floor to valve centre.

    Dry Riser Inlet Cabinet
    Dry Riser Inlet Cabinet

    16SWG Zintec Steel

    Part Number:10905502 Dry Riser Inlet Vertical
    Material:16SWG Zintec Steel
    Finish: RED RAL3002
    Box Dimensions: 395(Wide) x 595(High) x 295(Deep) mm
    Minimum Aperture: 395(Wide) x 595(High) X 295(Deep) mm

    16SWG Stainless Steel

    Part Number: 10905506 Dry Riser Inlet Vertical
    Material:16SWG Stainless Steel
    Finish: Satin Polished
    Box Dimensions: 395(Wide) x 595(High) x 295(Deep) mm
    Minimum Aperture: 395(Wide) x 595(High) X 295(Deep) mm