×
Dry Riser Outlet Cabinets & System Landon Kingsway dry riser outlet
Make an enquiry

Enquire about
Dry Riser Outlet Cabinets & System

    Dry Riser Outlet Cabinets & System

    Dry riser gate valves act as outlets from the riser main, these valves are situated on each floor of high rise buildings and are housed in outlet cabinets.

    Dry riser gate valves come complete with inlets flanged 65mm BS4504 PN16, 2.5” BS10 table D and screwed 2.5” BSPT, outlets to BS336, complete with blank cap and chain, strap and padlock, complying to BS5041 part 2.

    The top of riser should be fitted with an air release valve which releases all air from the riser, as water is pumped in, but closes automatically under pressure of water. A 1” drain valve can be used at the bottom of the riser if the pipe work goes below the inlet breeching valve, so the system can be completely drained.

    The outlet cabinets are manufactured to BS 5041 Part 4.

    We recommend mounting 750mm from floor to valve centre.

    Dry Riser Outlet
    Dry Riser Outlet

    16SWG Zintec Steel

    Part Number:10905601
    Material:16SWG ZINTEC STEEL
    Finish: RED RAL3002
    Box Dimensions: 460(Wide) x 630(High) x 275(Deep) mm
    Minimum Aperture: 470(Wide) x 640(High) X 285(Deep) mm

    16SWG Stainless Steel

    Part Number: 10905602
    Material:16SWG Stainless Steel
    Finish: Satin Polished
    Box Dimensions: 460(Wide) x 630(High) x 275(Deep) mm
    Minimum Aperture: 470(Wide) x 640(High) X 285(Deep) mm