The oil fill cabinet is designed to house all of the standard oil fill equipment used whilst filling the oil tank.
The Oil Fill Cabinet can accommodate the oil fill valve assembly, oil contents gauge, overfill alarm, BMS integration and door activated lighting. Oil fill point cabinets are available with or without the inspection window fitted in the door panel. All oil fill cabinets are complete with a locking handle and drip tray as standard.
Manufactured from Zintec coated steel and finished in powder coat paint for high corrosion resistance. Bespoke cabinets to your design requirements are available to special order.
Type A Single point oil fill cabinet
Type B Twin point oil fill cabinet
Type C Triple point oil fill cabinet
50mm oil fill valve assembly
65mm oil fill valve assembly
80mm oil fill valve assembly
100mm oil fill valve assembly
All oil fill valves are complete with support tubes, valves, full cap and chain.
Type A cabinet, drilled back c/w drip tray
Type B cabinet, drilled back c/w drip tray
Type C cabinet, drilled back c/w drip tray
Type A cabinet, drilled back c/w drip tray
Type B cabinet, drilled back c/w drip tray
Type C cabinet, drilled back c/w drip tray
Type A with internal lighting and switching assembly
Type B with internal lighting and switching assembly
Type C with internal lighting and switching assembly
25mm fill valve assembly c/w support tube gate valve, cap & chain
50mm fill valve assembly c/w support tube gate valve, cap & chain
65mm fill valve assembly c/w support tube gate valve, cap & chain
80mm fill valve assembly c/w support tube gate valve, cap & chain
100mm fill valve assembly c/w support tube gate valve, cap & chain
Supply Voltage 230V AC
Power 30VA + valve
Enclosure Off-White epoxy powder coated steel with locking door
Temperature Range: -10°C to +50°Valve Voltage
Output as supply voltage
Valve current output of 5A max
Weight 1 Kg (excluding main valve)
Timer Programmable 7 day
Valve EN161 Approved gas valve
Pressure Switch
Setting Range 2.5 to 50mbar (1 to 20” w.g.)
Mounting Thread G¼ female on base
Housing Material Diecast Aluminium with Polycarbonate cover
Electrical Contacts Screw terminals via PG11
Cable gland
Protection Rating IP54
Approvals To EU Gas Appliance Directive CE-0085 AO 0012
Oil Fill Equipment Tank Level Control
Available with connections from 1” through to 4” Landon Kingsway’s fill valve assemblies are used for filling fuel storage tanks they have been designed to allow external connection from tanker. …
Gas Detection Fire Protection Oil Fill Equipment
Electro-thermal link’s are designed to substantially improve life safety and minimize property damage by providing an instantaneous fusible link response and separation in the event of fire. Electro thermal links …
Oil Fill Equipment Fire Protection
Electrically Operated Ball valves EBV series provide a compact fail safe, cost effective solution for isolation of fuel lines. They are suitable for back up generator oil feed lines and …
Tank Level Control Oil Fill Equipment
The Unitop Hydrostatic Fuel Tank Gauge is a pneumatic tank level indicator. It is designed for showing the amount of fuel oil, heating oil, diesel, bio-diesel or AdBlue™ remaining in …
Ventguards provides a cross sectional area to vent the displaced air from a tank.
Tank Level Control Oil Fill Equipment
Each hydro-static contents level gauge is manufactured and calibrated to each users requirements.
Fire Protection Oil Fill Equipment
Mercury switches are to be used in conjunction with our Free-Fall Fire Valves to provide position sensing or to cut power to oil burner pump motors.
